- Introduction
- Parameter
- Features
- Application
- Inquiry
Introduction
The CNC tube bender used to pipe (such as: brass, aluminum, iron pipe) into a three-dimensional curve of the pipeline. Widely used in air conditioning, locomotive and other industries.
Parameter
Item | TB-13 | TB-19 | TB-25 | |
Bending capacity | Copper/Aluminum tube | Max: | Max: | Max: |
16mm×2.0mm | 19mm×2.0mm | 25mm×2.0mm | ||
Max bending angle | 190° | 190° | 190° | |
Max bending radius | 80mm | 80mm | 80mm | |
Max bending length | 1200mm | 1200mm | 1200mm | |
Axis speed | Feeding axis | 1200mm/sec | 1200mm/sec | 1200mm/sec |
Rounding axis | 180°/sec | 180°/sec | 180°/sec | |
Bending axis | 180°/sec | 180°/sec | 180°/sec | |
Power of Axis | Feeding axis | 0.75kw | 0.75kw | 0.75kw |
Rounding axis | 0.4kw | 0.4kw | 0.75kw | |
Bending axis | 1.5kw | 2.2kw | 3.0kw | |
Air Pressure | 0.4-0.7Mpa |
1.1CNC control, 10-inch color touch screen, bend, push, rotate, controlled byservosystem,fixture,
The mandrel or the like is controlled by hydraulic pressure.
1.2Main softwarefunctions
Work interface: manual, single bend, automatic, programming, calculation, map number storage; full-range absolute coordinate positioning; bend,
Push and spin have six speeds, but each step can be set separately; there are two lines of continuous and pinch.
Movement mode; can choose to have reverse pull, reverse rotation, guide mode
protection, mandrel selection function and core rod early retreat function;
The product number can be indicated next to the program number and used as a comparison form.
2.servo system
Japan's Mitsubishi servo motor and driver, three-axis control, respectively, feeding, turning, bending.
3. electrical system
Low-voltage electrical appliances such as contactors, relays, proximity switches, etc. use products from Japan OMRON and Schneider
4. Mechanical mechanism
4. 1 The bed is made of plates, steel pipes, etc., and is subjected to stress relief annealing, which is safe and reliable overall; the overall processing of the countertops ensures the plane requirements.
4. 2 Straight feeding, linear guide, mechanical positioning and reliable accuracy.
4. 3 The whole seamless transmission design is adopted in all mechanical transmission parts, which minimizes the accumulation error and ensures the stability of the pipe processingdimensions.
Features
1.Pneumatic clamping, fast, highefficiency.
2.The use of two moving head move quickly change the mold, stable andefficient.
3.Using CNC controller, display with 5.7 'blue liquid crystal display, can save atotalof 900 processingprocedures.
Part | Brand | Remark | |
1 | Main Frame | Home made | Welding |
2 | Painting | Home made | Powder Coating / |
customized color | |||
5 | CNC controller | Imported | Japan Original |
6 | 3D servo system | Mitsubishi | CE |
7 | Touch Screen | KINCO | CE |
8 | Contactor | Schneider | CE |
9 | Cylinder | AIRTAC | CE / CCC |
9 | Linear | HWIN | - |
10 | Motor | Local brand | CE/CCC |