- Introduction
- Parameter
- Features
- Inquiry
Introduction
The serpentine tube bender is consist of de-coiling device, straightening device, first feeding device, cutting device, second feeding device, bending device, rotary worktable, mainframe and the electric control system. The whole action is driven by hydraulic system and servo motor. And the machine is controlled by PLC with touch screen operation.
Parameter
No. | Part | Brand | Remark |
1 | Main Frame | Home made | Welding |
2 | Painting | Home made | Powder Coating / customized color |
3 | PLC controller | Mitsubishi | CE / FC / CCC |
4 | Touch Screen | Weinview | CE / FC |
5 | Contactor & Switches | Schneider | CE / FC |
6 | Ball Screw | Hiwin | - |
7 | Servo Driven System | Mitsubishi | CE/FC/CCC |
8 | Motor | WN | CE/CCC |
Features
1- Put the coiled tube onto de-coiler
2- Draw out the tube head into first feeding device manually
3- Start auto feeding to draw out tube into second feeding device continuously by through the cutting device without cutting.
4- Meanwhile. The first feeding device will recover the location and stop working. And the second feeding device will draw out the tube into bending tools for bending process.
5- Automatic chipless cutting when tube bending process is finished in exact position.
6- Stop the machine and take out the finished serpentine tube manually.
7- One cycle work is completed as above.
No. | Technical Data | Parameter | Remarks |
1 | Model | WA-10-Q | |
2 | Tube Material | Aluminum Tube | |
3 | Tube Size | Φ8 x T mm | (T<1.0mm) |
4 | Bending Radius | R11 | |
5 | Bending Capacity | 1-10pcs/cycle | |
7 | Bending Angle | 1-220 degree | |
8 | Bending Times | Up to 150times/cycle | |
9 | Feeding Length | 0-700mm/time | |
10 | Rotary table size | Φ3000mm | |
11 | Power Capacity | 10KW | |
12 | Input Air Pressure | 0.5-0.8MPa | |
13 | Input Power supply | 380V/50Hz/3Phase | Can be customized |
14 | Machine working area | 18 x 2.5 meter |