- Introduction
- Parameter
- Features
- Application
- Inquiry
Introduction
The evaporator end tube bending machine is used for aluminum tube bending on the two positions besides filter dryer, to get finished product automatically. The machine includes positioning device, clamping device, flexible bending roller device, worktable moving up and down device, feeding device and worktable rotating device, and the main frame and control system. Whole set machine is driven by pneumatic cylinder and servo motor, controlled by PLC and HMI. Work efficient is much more than traditional manual bending process.
Parameter
Parameter | Data | |
1 | Tube Material | Aluminum tube |
2 | Tube Diameter | Φ8.0-8.5mm |
Tube Wall Thickness | 0.7-1.0mm | |
4 | Bending Capacity | 1 piece / cycle |
5 | Bending Angle | 1~180 degree |
6 | Bending Radius | R15~R50 |
7 | Bending Speed | 1-2 seconds/bend |
8 | Feeding length | 0-400mm (Can be customized) |
9 | Worktable Size | 300 x 350mm |
10 | Control System | PLC control / Touch Screen |
11 | Motor Power | 5.0KW |
12 | Electric System | 380V, 50Hz, 3Phase (Customized) |
Working Air Pressure | 0.5-0.8MPa | |
13 | Dimension | 2300 x 900 x 1300 mm |
14 | Weight | About 600 KG |
Features
1- Special designed bending roller to ensure the good bending profile, also be flexible to reject from tube bend.
2- Servo motor control and screw thread transmission to get high accuracy.
3- Three axis working control to get exact bending profile automatically with high re-positioning precision
4- Optimized structure design for smooth operation and easy maintenance.
Part | Brand | Remark | |
1 | Main Frame | Home made | Welding |
2 | Painting | Home made | Powder Coating / customized color |
3 | Servo Motor | ELESY/CHINA | CE / FC |
4 | PLC | MISUBISHI/JAPAN | CE |
5 | HMI | MISUBISHI/JAPAN | CE |
6 | Contactor | SCHNEIDER/FRANCE | CE |
7 | Cylinder | AIRTAC/TAIWAN | CE / CCC |
8 | Screw Rod | HWIN/ TAIWAN | - |
9 | Guide Linear | HWIN/ TAIWAN | |
10 | Motor | Local brand | CE/CCC |