All Categories
EN

Products

APPLICATION

Find whole line solution here

LEARN MORE
1
Copper Tube End Closing Machine T-50

Copper Tube End Closing Machine T-50


  • Introduction
  • Parameter
  • Features
  • Application
  • Inquiry
Introduction

Thetube endspinning closing machine is used for the closing of metal pipe end, mainly used in the manufacture of air conditioners, water heaters, refrigerators, car silencers, and compressors and dryers.

image

Parameter
NoPartBrandRemark
1Programmable PLCMitsubishiJapan
2Touch ScreenMitsubishiJapan
3Cylinders and solenoid valvesSMCJapan
4Servo systemMitsubishiJanpan
5switches and sensorsAutonics / SchneiderKorea/Germany
6electrical appliancesSiemens, SchneiderGermany

The principle of the spinning machine is that when the workpiece rotates at a high speed, the workpiece is pressed by a certain path through a strong external force, and the material is repeatedly pressed by the roller to make it from point to line, and the line to the surface eventually causes the workpiece to be thermally deformed. The shape you need. Depending on the required pressing force, the small spinning machine can drive the screw to generate pressure through the servo motor. Some large-scale powerful spinning machines need to be squeezed by hydraulic means.


Features

1.The workpiece is fixed by a rotating tool to rotate the seal, which can fully meet the sealing process of a long pipe of more than 1 meter.

2. The workpiece does not rotate during the machining process greatly improves the safety performance of the machine. By improving the clamping die, the copper tube which can not be processed by the rotating workpiece can be spun and sealed, which improves the adaptability of the machine to the product.

3. This equipment adopts the advantages of servo feeding, servo feeding, PLC control, simple programming, high repeatability and stable performance.


ItemData
Tube materialCopper tube
Tube diameter rangeMax Φ50mm/Φ80mm
Working thickness0.6-2mm
Min Tube length200mm
Power380V(AC)±10%,50HZ,3pahse
Air pressure0.5±0.1MPa
Control systemPLC system
Loading/UnloadingBy Manual
Tube end closing shapeFlat shape
     Mold controlServo motor with high precision
Clamp powerPneumatic power
Motor power8Kw/10KW
Working capacity25 Seconds (∅50)
Dimension2200*1000*1600mm

image

Inquiry

Contact Us

Recommended Products